Why is My Blink Camera not Connecting to WiFi? (Quick Troubleshoot)

The Blink camera subscribers’ might have the issues with their Blink devices can’t be connected to the WiFi.

The WiFi network needs to have a 2.4GHz frequency to operate a Blink camera properly.

It creates obstacles to connecting the camera when the network is about 5GHz.

Blink cameras can also have problems with interference with other devices that degrade signal strength to the camera.

The slow network speed of WiFi is another big reason for network disconnection of Blink camera as it requires almost 2Mbps of minimum upload speed.

A speed limit of less than 2Mbps can result in network disconnection of the Blink camera.

04 Common Causes That Your Blink Camera not Connecting to WiFi

Cause 01: Issue with Unstable Network Speed

An unstable network connection with the Blink camera may cause disconnectivity with the WiFi connection.

Also, malfunctioned network components cause problems with the WiFi connection.

Some obstacles may cause hindrances to the router’s ability to perform well. It may also result in issues with the stability of the WiFi connection.

Solution: To fix this issue, follow these 4 tips-

  1. Check the WiFi connection first.
  2. Move the router closer to the Blink camera to ensure that there is no hindrance.
  3. Check whether the WiFi and camera components are individually working or not.
  4. Finally, check the stability of your other devices and try to find out the main problematic part.

Cause 02: Not Configured Sync Module

The sync module can have issues with network connection as it controls the connectivity of the camera with the router.

If the sync module is not well connected or not well configured, then it may cause discontinuity of internet connection.

Solution: Follow these 3 steps to solve the issue-

  1. First, check the sync module and the configuration.
  2. Turn on the sync module if it is turned off.
  3. Set it up properly and try to position it closer to the WiFi router so that it can have a proper connection.

Cause 03: Wrong Password Issue

An incorrect WiFi password can cause issues with not connecting to the router.

Entering the wrong credentials or attempting to connect with the wrong WiFi name to your camera will not allow it to connect to the internet.

Sometimes, an attempt to connect with the wrong router can cause it not to connect with the WiFi.

Solution: Enter the right name of the WiFi and password.

Also, ensure that your camera is connecting with the latest firmware update.

If your WiFi password is updated, make sure that your Blink devices are given the upgraded password while attempting to connect with WiFi.

Cause 04: Battery Errors

There may be a lagging internet connection with lots of mishaps with your Blink camera.

You may not be able to find out the actual reason for this problem with your camera.

This may be the result of battery issues of either the router or the Blink camera.

A power cycle is used to solve the problem in case you can’t find the reason here.

The power cycle is a process of rebooting your device and removing the entire previous configuration.

It may solve the issue by resetting your device setup.

Solution: To perform the power cycle to both your router and camera, follow these 3 steps

  1. Turn off the router first.
  2. Let the router be powered off mode for a couple of minutes.
  3. Again, turn it on by pressing the power button and connect the power plug.

To reboot your camera, follow these 3 steps:

  1. Turn off the Blink camera by pressing the reset button. Then, put off the batteries.
  2. Let the camera sit idle for a couple of minutes.
  3. Turn on the camera after putting on the batteries again and connect properly with the WiFi connection.

If there is still a problem with connecting to WiFi after checking all the possible solutions, then you might have problems with a router or WiFi service.

Contact with the WiFi service provider. If the WiFi signal is all ok, then contact the Blink service centre.

They can fix this issue by providing the necessary suggestions.

How to Connect Blink Camera to WiFi

If you want to connect your Blink camera to the WiFi, you can go through these necessary steps:

  1. First, you need to create a Blink account. For this, you need to download the Blink app.
  2. Add your Blink camera to your app and place it inside the range of your WiFi zone.
  3. Go to the Device Settings option and then tap General Settings.
  4. Enter your WiFi password and connect it with the Blink camera.

The process of connecting your camera to the WiFi is not that much tough.

It is a very simple process, but you have to be aware of the WiFi range while connecting, as well as the condition of your camera battery.

Also, the network Mbps can be an issue here when connecting the WiFi properly.


Why is my Blink camera not connecting to the Wi-Fi extender?

It may be caused due to a weak network signal or improper configuration of WiFi extender settings.

Set your camera closer to the extender and ensure the proper configuration.

You can follow the system reboot to reset your device so that it can connect with your WiFi extender.

Also, resetting the camera and router can solve this issue sometimes easily.

Does the blink camera connect to Wi-Fi or a sync module?

Blink cameras need to connect to a WiFi connection to perform their daily operations.

The sync module works like a hub for Blink’s security system. It integrates Blink devices with a WiFi connection.

But a Sync module is needed to be configured first to integrate with other devices.

Thus, the Blink camera must be connected to the sync module.

How do you connect the blink camera to the wifi extender?

It is the same process as connecting with the WiFi. First, you need to download the Blink app and create a Blink account.

Then, you have to go to the Device Settings. There, you’ll find the option for connecting devices with a WiFi extender.

Enter your WiFi password. Follow the instructions and add your devices to the WiFi extender.