Blink Camera Flashing Red (Quick Troubleshooting: Causes and Solutions)

When encountering a Blink camera flashing red, it’s natural to feel concerned about the functionality of your security device.

Fortunately, understanding the reasons behind this issue and potential solutions can equip you with the necessary knowledge to address the matter confidently.

One common reason for a red flashing light on your Blink camera is connectivity problems. During setup, a red LED light indicates that your camera is searching for an internet connection.

If the red light persists, it’s important to verify your active internet connection and check your router.

Another factor to consider is the status of your camera’s batteries. If your camera flashes red five or six times, it suggests that the batteries have failed and need replacement.

In this case, you should insert two new AA Lithium non-rechargeable batteries and wait for a few seconds. Following these steps, you can effectively identify and address the cause of your Blink camera’s red flashing light.

How to Understanding The Blink Camera LED Lights?

Managing your Blink camera system involves being familiar with the LED lights on the device. These lights help you to diagnose and troubleshoot any issues that might arise with your camera.

This section will cover the primary LED light colors and patterns you may encounter and their meaning.

01. Flashing Red Light

A flashing red light is often an indicator that the Blink camera is having trouble connecting to the internet. This may occur during setup or when there is a change in the Wi-Fi network.

To resolve the issue, check your router and ensure that you have an active internet connection. If the problem persists, you may need to reconnect to the Wi-Fi or Sync Module through the Blink app.

02. Solid Red Light

If the LED light on your Blink camera is solid red, this indicates that the camera’s batteries are failing. You will need to replace the two AA Lithium non-rechargeable batteries with new ones.

Wait a few seconds after inserting the new batteries and check the Blink app for a connection.

03. Blue Light

The blue light on a Blink camera signifies that the camera is currently recording or streaming live footage. This is an excellent way for you to know when the camera is active and capturing images.

If you notice the blue light when you’re not expecting it, double-check your camera settings to ensure that it is functioning as desired.

04. Solid Green Light

A solid green light on your Blink camera indicates that the camera is connected to the Sync Module and functioning correctly. This is a sign that your camera system is operating as it should be and requires no further action on your part.

In conclusion, understanding the LED lights on your Blink camera is essential for maintaining and troubleshooting your system.

By recognizing the meaning behind each light color and pattern, you can quickly address any issues and keep your camera operational.

How to Troubleshooting When Blink Camera Flashing Red?

01. Connectivity Issues

If your Blink camera is flashing red, it can indicate issues with your internet connectivity.

Check your Wi-Fi network and ensure your Blink devices, including Blink Outdoor, Blink Indoor, and the Blink Video Doorbell, are connected to the internet.

To resolve such issues, try the following:

  1. Verify your router’s functionality and signal strength.
  2. Test your internet connection with other devices.
  3. Reconnect your Blink camera to your Wi-Fi network using the Blink app.
  4. If you are still having issues, consider contacting Blink Support.

02. Low Battery Indicator

Another reason for your Blink camera flashing red could be low battery life. For Blink cameras like the Blink XT and Blink XT2, this requires replacing the AA batteries.

Blink Camera Battery Indicator issue

When you notice the red LED flashing 5 or 6 times, take the following steps:

  1. Turn off your camera and remove the old batteries.
  2. Insert two new AA Lithium non-rechargeable batteries.
  3. Wait a few seconds for the camera to initialize.
  4. Observe the LED light to confirm the issue is resolved.

03. Resetting the Camera

If connectivity issues or low battery life are not the cause of your Blink camera flashing red, it may be time to perform a hard reset on your device.

This can help restore the camera’s functionality and resolve any software-related issues. To reset your camera, follow these steps:

  1. Ensure your camera is connected to a power source.
  2. Locate the reset button on your camera (typically found at the back).
  3. Press and hold the reset button for 10-15 seconds.
  4. Wait for the camera to reboot and complete the initialization process.
  5. Use the Blink app to reconnect the camera to your Wi-Fi network and sync module.

By troubleshooting the red flashing light on your Blink camera, you can ensure the security and functionality of your device.

How to Setup and Maintenance Blink Camera Properly?

Initial Setup

To set up your Blink camera successfully, follow the instructions provided with the device. First, download and install the Blink app on your smartphone.

Create an account and log in to access the app. Add the camera to an existing system or a new system by entering its serial number located on the back of the device or on its packaging.

Place your Blink camera in a suitable location, considering factors such as motion detection and coverage area. For optimal motion detection, ensure the camera’s view is clear and unobstructed.

Blink Indoor, Outdoor, and Mini cameras can be mounted on walls or placed on flat surfaces, while the Blink Video Doorbell should be installed at a suitable height to capture the faces of visitors.

Connection to Wi-Fi Network

After setting up your camera physically, connect it to your Wi-Fi network through the Blink app. The flashing red light on your camera indicates it is not connected to Wi-Fi or the Sync Module.

To fix this, check the app for instructions on connecting to Wi-Fi or a Sync Module.

Ensure that your router is functioning properly and your camera is within its range to maintain a strong signal. If you encounter connectivity issues, try resetting your Wi-Fi or moving the camera closer to the router.

Maintaining Battery Life

Blink cameras, excluding the Blink Mini, are powered by AA batteries.

To maximize battery life, follow these tips:

  • Reduce the usage of Live View: Frequent use of the Live View feature can drain the battery quickly, so use it sparingly.
  • Adjust the motion detection settings: Fine-tune the motion detection sensitivity and zones to avoid excessive alerts that can shorten battery life.
  • Regularly check battery levels: Monitor the battery levels in the Blink app and replace AA batteries as required.

Proper setup and maintenance of your Blink camera ensure that it functions efficiently and provides reliable home security.

By following these steps, you can enjoy a seamless security experience and protect your home with confidence.


What does Blink camera red light mean?

A red light on your Blink camera typically indicates that the camera is struggling to establish a connection to the internet. The light flashes every three seconds until a connection is established.

Check your router and verify that you have an active internet connection to solve this problem. For more details, visit Blink Support.

How to turn off Blink camera red light?

Unfortunately, you cannot manually turn off the red light on your Blink camera without resolving the connection issue. First, check your Wi-Fi connection and ensure the camera is within range of your router.

If the connection is stable, the red light should stop flashing once your camera establishes a connection with the internet.

Why Does Blink camera flashing green?

If your Blink camera is flashing green lights, it usually means the camera is in setup mode. During this process, the camera is attempting to connect to your Wi-Fi.

Follow the prompts on the Blink app to complete the setup. For more information on Blink camera setup, consult their support page.

Why can’t my Blink camera connect?

There are several factors that could cause your Blink camera not to connect. Some common reasons include an unstable internet connection, being too far from the Wi-Fi router, or having too many devices connected to your network.

Check your Wi-Fi settings and connection, and ensure that your camera is within an optimal range from your router. You can find more troubleshooting steps from this article.