Blink Camera Blinking Green (Causes and Solutions)

In the world of home security, Blink cameras have gained popularity due to their ease of use and high-quality performance.

However, like any technological device, you may sometimes encounter issues or complications. One common problem you might face is the Blink camera flashing green, which could indicate a connectivity issue.

Understanding the possible causes of your Blink camera blinking green is crucial in order to resolve the issue and maintain the security of your home.

In this guide I am going to reveal what causes blinking green light to your cameras and required solutions which is very handy and helpful.

What Does Mean Blink Camera Blinking Green Light?

A flashing green light on your Blink camera typically means that it can’t reach the Blink cloud servers, and although your local network may be reachable, there’s an issue with your camera’s connection to the internet or the Blink servers.

By identifying the root cause and following troubleshooting steps, you can ensure your camera functions effectively to secure your home.

How to Understand Blink Camera Blinking Green?

LED Indicator Colors

When using a Blink camera, it’s important to understand the LED indicator colors on the device. These colors provide valuable information about the current status of your camera.

Here are the common LED colors you may encounter:

  • Solid green: This indicates that your Blink camera is connected to the local and internet networks without any issue.
  • Flashing green: This means there is an issue with the camera’s internet connection, likely related to your home Wi-Fi network.
  • Flashing red: This signifies a generic network issue.

Green Light Meaning

When your Blink camera displays a blinking green light, it signifies that there’s an issue with the camera’s internet connection.

This may happen even if the local network is accessible, but the internet or Blink servers aren’t. Some of the reasons for this include:

  • Router connection issues: There might be an unstable connection or other factors that have caused a status change in your router.
  • Power cable problems: In the case of a Blink Mini camera, the power cable could be causing the green blinking light.
  • Sync module issues: The sync module serves as the hub for connecting your Blink cameras and controlling them remotely. A problem with the sync module could also result in a blinking green light.

In order to address the blinking green light on your Blink camera, try the following steps:

  1. Remove the batteries from the Blink Camera by unscrewing the backplate. For Blink Mini, unplug the power cable.
  2. Leave the camera to rest for a few seconds, preferably a minute.
  3. Plug the batteries back in (or plug in the power cable), turn on the camera, and check if the issue is resolved.

Remember, always keep an eye on the LED indicator colors to better understand and troubleshoot your Blink camera.

In case of damaged power cables which is unable to supply power to the device properly you need to change it and you might need to spend between $20 to $30.

Why Is My Blink Camera Blinking Green Lights?

Network Issues

The blinking green light on your Blink camera could be an indication of network-related issues. Common culprits include internet outages, weak Wi-Fi signal strength, or problems with your router.

To troubleshoot these issues, you can:

  1. Check your internet connection to ensure it’s working properly. If your connection is down, you might need to contact your Internet Service Provider (ISP) for assistance.
  2. Verify the Wi-Fi signal strength and make sure your camera is within the recommended range of your router. A weak Wi-Fi signal can lead to the green light flashing on your camera.
  3. To confirm if there’s a local outage in your area, you can use Downdetector or similar websites. These platforms can provide information on reported outages in your region.

Hardware Issues

In addition to network issues, hardware problems might also cause your Blink camera to flash green. Here are a few steps you can take to address common hardware concerns:

  1. If your camera uses batteries, ensure they are correctly installed and not low on power. A low battery can lead to the green light flashing on your Blink camera.
  2. Reboot your camera by following these steps: remove the batteries and wait one minute. After that, put the batteries back in and power up the camera. If you’re using a Blink Mini, unplug the power cable and plug it back in after a minute.
  3. Confirm that the camera is updated to the latest firmware as outdated software can lead to connectivity issues.

Keep in mind that while network and hardware issues are the most common causes of the blinking green light, other factors such as syncing mode, motion detection, and Blink server status might also play a role.

Always refer to the official Blink support pages for the most up-to-date troubleshooting guides.

Troubleshooting The Blink Cameras Blinking Green Light

Checking Wi-Fi Connection

A blinking green light on your Blink camera may indicate a problem with your Wi-Fi connection. To troubleshoot, start by checking the network settings in the Blink app.

Look for the settings icon and verify that your camera is connected to the correct Wi-Fi network. If you are still experiencing issues, there may be interference causing the connection to drop.

Try moving your camera or router to a different location within your home, while ensuring they remain within range of each other.

Resetting the Blink Camera

If the blinking green light persists, you may need to reset your Blink camera. For Blink Mini cameras, press and hold the reset button on the bottom of the camera for 10-15 seconds until you see a solid green and flashing blue light.

For other Blink camera models, you can remove the batteries, wait a few seconds, and then insert them back in. After resetting the camera, open the Blink app, and set up the camera as you did initially.

Power Cycling Router and Camera

Another way to resolve the blinking green light issue is by power cycling your router and camera. To do this, first unplug the power cable from your router and camera.

Wait for 30 seconds and then plug the power cables back in. Allow a few minutes for your router and camera to boot up, and then check if the issue persists.

Firmware Updates

Occasionally, firmware updates can help resolve issues with your Blink camera. Make sure your camera’s firmware is up-to-date by opening the Blink app and checking for available updates.

If an update is available, follow the app’s instructions to install it. Remember to keep your camera connected to a power supply during firmware updates, as interrupting the process could cause issues with your camera’s functionality.

By following these troubleshooting steps, you should be able to resolve the blinking green light issue on your Blink camera.

If the problem continues, it’s a good idea to contact customer support for further assistance.

Advanced Solutions for Blink Camera Blinking Green

Contacting Blink Support

If you’re still experiencing a flashing green light on your Blink camera, it’s time to reach out to Blink Support. They can help you diagnose the issue and provide further assistance.

Before you contact them, ensure you have the following information readily available:

  • The type of Blink camera you’re using (e.g., Blink Mini)
  • A description of the issue you’re facing (flashing green light)
  • Details about your network setup, including your router and internet service provider

You can reach Blink Support via their customer service channels, including phone, email, and chat. When communicating, remember to be clear and concise regarding your issue to receive the most effective assistance.

Signal Boosting Techniques

Your Blink camera’s flashing green light may indicate connectivity issues.

Here are some signal-boosting techniques you can try:

  1. Relocate your router: Make sure your Wi-Fi router is placed centrally and elevated in your home. This positioning allows the signal to be distributed evenly throughout the house.
  2. Improve wireless signal strength: If you’re using a Blink Mini, consider plugging the power cable into a different outlet to see if it resolves the issue. Additionally, keep the distance between the camera and your router minimal to ensure a strong signal.
  3. Use a Wi-Fi extender: If you’re still facing connectivity problems, consider investing in a Wi-Fi extender to boost your Wi-Fi signal and improve your camera’s connection to the network.

By following these advanced solutions, you’ll be one step closer to resolving your Blink camera’s flashing green light issue.

Don’t hesitate to contact Blink Support if you require additional help or have any concerns about your security system.

How do You Managing  Blink Camera Settings?

Adding or Deleting Devices

To manage your Blink devices, start by opening the Blink app on your smartphone or tablet. Navigate to the main Devices screen, where you’ll see a list of all connected Blink cameras.

To add a new device, tap the “+” icon in the top right corner and follow the on-screen instructions. When adding a new camera to your Blink system, make sure it’s powered on and within range of your Wi-Fi router.

To delete a device, select the camera in question, tap the settings icon (gear icon), and scroll down to the “Delete Device” option. Confirm your selection to remove the device from your Blink system.

Adjusting Motion Detection Sensitivity

It’s essential to adjust motion detection sensitivity according to your needs, enabling your Blink devices to capture meaningful events without triggering false alarms.

To access motion detection settings, select a camera from the Devices screen and tap the settings icon (gear icon). Locate the “Motion Detection” submenu, and you’ll find a slider to adjust sensitivity.

Moving the slider to the left will decrease sensitivity, making it less likely to detect minor movements, such as leaves blowing in the wind.

Moving the slider to the right will increase sensitivity, capturing more motion events, including those from small animals or far-off movements.

Keep in mind that higher sensitivity levels may also result in more frequent alerts and reduced battery life.

To further fine-tune your motion detection settings, consider using the Activity Zones feature available via the Blink app.

This allows you to define specific areas within the camera’s view where motion detection is active, ignoring others, and reducing false alarms.

While managing your camera settings, don’t forget to test the Live View feature, which lets you monitor your Blink devices in real-time. This ensures that your cameras are set up correctly, and you’re satisfied with their placement and coverage.

In summary, routinely managing your Blink camera settings can help you make the most of your home security system.

Adjusting motion detection sensitivity and adding or deleting devices as needed will ensure that you’re always on top of any activity in your designated monitoring areas.

Remember to utilize the Blink app for the best user experience and to maintain control over your security system.


Why is my Blink Mini blinking green?

If your Blink Mini is blinking green, it indicates that it can’t reach the Blink cloud servers. This issue can occur when your local network is reachable, but there are problems with either the internet or Blink servers.

To fix this issue, try power cycling the camera by removing the power cable, waiting for a minute, and plugging it back in. Additionally, check your Wi-Fi signal or router connection to make sure it’s stable.

Sync Module 2 blinking green?

If your Sync Module 2 is blinking green, it is experiencing a similar issue as the Blink Mini blinking green. This indicates that it cannot connect to the Blink cloud servers, even though your local network is reachable.

To resolve this issue, try restarting the Sync Module 2 and ensuring that your router and internet connection are functioning properly.

Blink camera blinking blue?

A Blink camera blinking blue light indicates that it is in the process of pairing with the Sync Module. To complete this process, follow the instructions provided in the Blink app to ensure that your camera and Sync Module are successfully paired.

If the blue light persists and you’re having pairing issues, try moving your camera closer to the Sync Module, ensuring that your Wi-Fi network is functioning correctly, and restarting both devices if needed.