We may earn an income from purchases made through this website on Amazon.com as an affiliate commission. Learn more.

How to Remove Shower Handle Without Screws (Step-By-Step Guide)

This is a friendly and straightforward guide on how to remove shower handle without screws. We know how tedious and stressful it can be to remove one of these from the faceplate.

Some shower handles can easily be removed, while others require a lot of work.

For example, to remove some handles, you might need to remove the cap and then the set screw.

Others can be removed by simply turning the handle until it comes right off.

Nonetheless, we’ll explore several methods to remove them. This way, you will have a general idea of how you can remove any handle independently.

You can also go through the review of best luxury shower heads

DIY Guide: 3 Simple Steps To Remove A Shower Handle With Stripped Screws

Stripped screws can be a real pain in the neck to deal with. They are super hard to remove even with the right tools.

To make this process as easy as possible, we’ve gathered three simple steps to remove the set screw.

1. What You Will Need

Keep in mind that you might not need all these tools. The first method might be more than enough to remove the stripped screw.

But if it doesn’t, you still have two other ways. Here are the tools you need at first:

  • An Allen wrench—this tool is super helpful when removing tight screws. This screwdriver should be enough to remove the stripped screw most of the time.
  • A hammer and a flathead drill bit—a great and simple way to remove a stripped screw is hitting it with a hammer and a flathead drill bit.
  • A drill—use it to remove the stripped screw after you’ve hit it with the hammer.
  • Penetrating oil—when dealing with old shower handles, use penetrating oil. It doesn’t matter what brand you choose.

2. Use An Allen Wrench

Before getting started, spray penetrating oil all over the screw.

Using penetrating fluid makes a considerable difference when removing one of these screws.

If the screw is stripped out, use an Allen wrench. Get it in there, and you should be able to pull it out.

However, if that does not work, cut off the end of the Allen wrench and then put it into a drill.

This way, you could use the Allen wrench as a drill bit.

Be careful, though. If you apply too much strength, you could permanently destroy the screw. So, gently drill it out.

Once you’ve set up the drill bit, gently hold the shower handle. When doing this, do not go all in.

Valves can be pretty sensitive, and damaging them only takes a few seconds.

Now put the drill in reverse mode, and then set the speed to low as you’re holding the other side of the shower handle.

After a couple of seconds, the screw should come off.

For one thing, there’s no guarantee that the screw will come off.

If you cannot get it off after a while, we suggest moving onto the next step. Any further attempt could blow the screw.

3. Use a Phillips Head Screwdriver

Another tool you could try out is a Phillips head screwdriver. This kind of screwdriver can come in handy when dealing with stuck screws.

So, insert the screwdriver and find the right bite and turn it clockwise.

It might take some time before you find the right spot.

It doesn’t always work, but it could help you if the Allen wrench didn’t remove the stripped screw.

4. Use A Drill

If the previous method didn’t quite work for you, you could “smash” a flathead drill bit into the screw.

Now, this process is a little bit difficult to pull off.

And, you might get yourself into a nasty situation if you make a single mistake, though it’s worth trying out if the two previous methods didn’t work out.

This process’s whole idea is to create “teeth” with the hammer, allowing you to remove the screw from the valve.

To do this, grab the other side of the shower handle. Once again, do not go all-in when holding the handle.

You might damage the valve on the inside. Next up, grab your flathead drill bit and gently hammer it until you’ve created enough “teeth.”

Now put the drill bit into the drill and then set the speed to low.

Do not set the speed too high as that can damage the unit. After that, run the drill in reverse mode.

Now find the teeth you created with the hammer, and then gently drill the screw out. It should come right off after that.

DIY Guide: How To Remove A Shower Handle With No Visible Screws

If the cap does not pop off or unscrew no matter what you do, then there’s a high chance that there’s a hidden screw somewhere.

To get around this, follow these steps to learn how to remove shower handle without screws:

1. What You Will Need

For this job, here is what you need:

  • A screwdriver or an Allen wrench—depending on your shower handle, you might need one or the other.
  • WD-40 penetrating oil—use any penetrating oil you have. As long as it gets the job done, you are good to go. Using this oil will allow you to loosen the set screw in case there’s one somewhere.

2. How To Remove Shower Faucet Handle With No Screw

First and foremost, you need to determine whether the shower faucet handle actually has screws.

Most of the time, the screws are being covered by the handle.

For example, once you’ve removed the handle cap, you’ll most likely find a screw in the middle.

There’s no guarantee about that, but you could give it a try.

3. Determine The Name Of The Brand

Figuring out the brand’s name will also determine just how much work there’s ahead of you.

All brands make different shower handles. So, any step we go through here is subject to change depending on your model.

Also, knowing the brand’s name should help you find all the screws or any other step you should be aware of.

4. Turn Off The Water

Before getting your hands dirty, turn off the water to the entire house.

When turning any plumbing fixture, professionals suggest turning off the water supply.

Even if you have a shut-off valve, things could get pretty messy in a matter of seconds.

So, go ahead and find the valve. Once you’ve found the valve, crank it clockwise.

After that, open the shower handle to drain the water out. With that out of the way, you can safely remove the shower handle.

5. Unscrew The Handle

Head over to the shower handle. Grab the handle and turn it around.

Turn it for about 40 iterations. Keep doing this until it comes off. Take as much time as needed for this job. There is no need to rush it.

And that’s it. You’ve successfully removed the handle.

Once you’ve removed the shower handle, you should see the set screw to set the temperature.

If you’re still not quite sure how this works, watch this video as this guy shows you how you can remove your Pfister shower handle without a set screw:

DIY Guide: How To Remove A Stuck Shower Handle

Every homeowner has faced this before: a shower handle that won’t come off no matter what you do.

Don’t worry, though. We’ve got the perfect trick to get around that. That said, follow these steps to remove the stuck shower handle:

1. What You Will Need

Before getting your hands dirty, consider getting the following tools for this job:

  • Handle and sleeve puller kit—to remove a stuck shower handle, use one of these tools. It’s super cheap and makes this job ridiculously easy.
  • A screwdriver or Allen wrench—don’t forget to use a screwdriver to remove any hidden screws you find on the shower handle.
  • Penetrating oil—when dealing with stuck shower handles, using penetrating oil can really come in handy.

2. Shut Off The Main Valve

As always, shut off the power before removing the shower handle.

Don’t risk it when pulling the shower handle. Water could come out of it, causing a mess.

3. Remove The Center Screw

The first step to removing the shower handle is unscrewing the center screw. To do this, use your screwdriver.

If you cannot find the screw, it might be underneath the shower handle.

Or you might have to pop off the cap in the middle to access the center screw. Alternatively, turn the handle.

4. Remove The Screws From The Faceplate

Before pulling it out, you need to remove the two screws holding the faceplate together.

Once you’ve removed the screws, you should be able to take the faceplate off.

Also, put the screws off to the side or somewhere you can find them.

They could go down the drain, and it’s next to impossible to get them back.

5. How to Remove a Stuck Shower Handle

If the shower handle has never been removed before, chances are, it’s stuck.

To learn how to remove a shower handle that is stuck, use a handle and sleeve puller kit.

This is the safest and most efficient way to remove a stuck shower handle.

It won’t damage the valve, and you don’t need to use any other special too.

That said, once you have the sleeve and puller kit, attach it to the shower handle.

After that, turn the handle in a clockwise motion. This will carefully remove the shower handle in a couple of seconds.

And that’s it. Your shower handle should come very quickly with your handle and sleeve puller kit.

This is a simple fix, and you can get one of these tools for roughly $12.

If you need help getting through the steps, check this video out:

Frequently Asked Questions (FAQs)

You have questions, and we have answers! Down below, you’ll find useful information about shower handles.

How do you remove a Moen shower handle without screws?

Here is how to remove a shower handle that has no screws: Use an Allen wrench.

If you can’t find any screws, chances are there’s one underneath the shower handle.

So, get the Allen wrench in there and remove the screws. Alternately, you could use a drill.

How do you remove a handle without screws?

If you’ve removed the back-plate but cannot remove the cap, there’s probably a screw somewhere.

Perhaps, there’s a screw in the middle that you overlooked.

If that’s not the case, turn the handle a couple of times. It should come right off after a while.

Why is my shower handle stuck?

If the shower handle won’t come off, it probably means it got corroded.

You can try to remove the set screw using an Allen wrench, but even if you manage to remove it, the handle won’t come off. Instead, use a handle and sleeve puller kit.

Can you replace shower handle without replacing the valve?

Yes, you can replace the shower handle without replacing the existing valve.

That is, if you replace the shower handle with the same exact model, meaning if you got one from Moen, you have to get that model again.

Conclusion

We covered the most common steps on how to remove shower handle without screws.

As you know by now, there are different ways to remove the shower handle.

Even though the screw might not be visible at first sight, there’s almost always a small screw holding the unit together.

It could be on the valve, or it could be underneath the shower handle.

Figuring out where the screw is, is the first step to taking off the shower handle.

On top of that, you should always turn off the main water supply line to your house when doing any plumbing job.

Never take a chance with the water supply.